Author Topic: Create a bootable Windows Vista on Flash Memory Read more: Install Windows Vist  (Read 1878 times)

Mir Hossain

  • Newbie
  • *
  • Posts: 4
    • View Profile
1. Format the USB flash memory drive to FAT32 file system

    Run CMD.EXE and type the following command. Note: This set of commands assumes that the USB flash drive is addressed as “disk 1″. Double check that by doing a list of the disks (type “list disk”) before cleaning it).

   1. diskpart
   2. select disk 1
   3. clean
   4. create partition primary
   5. select partition 1
   6. active
   7. format fs=fat32
   8. assign
   9. exit

2. Copy Windows Vista’s DVD ROM content to the Flash Drive

Type in command to start copying all the content from the Windows Vista DVD to your newly formatted high speed flash drive.

    * xcopy d:\*.* /s/e/f e:\

3. Setup your computer BIOS to boot from USB Drive

4. Install Windows Vista from flash memory drive

After finish the above step. you can try to view how fast the installation of windows vista can be completed. Let us know how you feel if whether installing windows vista on flash memory drive compare the installation window vista on DVD media.


____________________  Md. Mir Hossain
                                          daffodilPC Care
                                          Cell : 01713493155